4 Easy Water Conservation Tips for Apartment Communities

Image of a water facet tied in a knot

With rising water rates, persistent drought conditions, and a growing U.S. population, water conservation is becoming more important every day. Water and sewerage costs have doubled in one of every four municipalities over the last 12 years, which can hurt property managers today and in the future.

Did you know that March 2013 was the 5th driest year nationally since 1895? According to the National Oceanic and Atmospheric Administration (NOAA), 50 percent of the U.S. continues to fight drought conditions. While conditions are improving, about seven percent of the contiguous U.S. was experiencing severe to extreme drought as of the end of September 2013. At the same time, other utility costs have increased faster than inflation, creating a need for conservation and improving efficiencies.

The time is right for apartment communities to begin—or improve on their existing—water conservation plans.

While implementing water conservation practices may sound like a very involved process, it doesn’t have to be. Typically, a few modifications with existing fixtures and systems will yield significant savings. A wealth of products and new technologies designed to reduce water consumption are readily available on the market today, helping properties save money while reducing their environmental impact.

Here are four easy water conservation tips to help you get started:

Tip 1: Go Low-Flow to Save Water

A number of plumbing products on the market today use less water but still get the job of rinsing, cleansing, and flushing done. The result is a large water savings which trickles down to a better bottom line.

Here are some smart solutions to save water in an apartment that are fast and easy replacements for your maintenance teams:

  • Replacing a standard 2.5 gallon per minute (GPM) kitchen faucet aerator with a 1.5 GPM saves 40 percent
  • Screwing in a 1.0 GPM aerator onto a 2.2 GPM bathroom faucet saves 54 percent and they are often $1 each or less
  • Installing low-flow showerheads (2.0 GPM or lower) and low-flush toilets (1.28 gallons per flush or lower) save up to 50 percent in water consumption and your residents won’t notice a difference

Tip 2: Adjust Water Volume in Older Toilets

Older toilets that still function can be retrofitted with a dual flush system that reduces the amount of water used for liquids and it is less expensive than replacing the whole toilet. Dual flush systems work best with 1.6- to 3.5 gallon per flush (GFP) toilets but can also be used on 1.28 GPF.

Tip 3: Smart Landscaping Conserves Water

By installing smart controllers, those that detect moisture and track local weather then change watering patterns, will keep landscapes looking good while reducing consumption.

Commercial Evapotranspiration Technology (ET)-based controllers are basically a thermostat for an apartment property’s sprinkler system. ET systems tell the water source when to turn on and off based on current conditions so that overwatering in minimized or even eliminated.

The beauty of installing smart controllers is that they are typically an even swap for the old controller. No additional upgrade of the irrigation system is necessary, and the change-out can be done rather quickly.

Tip 4: Look for WaterSense-Certified Products

Water conservation products certified by WaterSense®, a partnership program administered by the Environmental Protection Agency (EPA), are readily available and are certified to use less water while not affecting efficacy.

The WaterSense program was launched to provide businesses and consumers with easy ways to save water, as both a label for products and a resource to people. To get a better idea of what the impact of upgrading to WaterSense products could be for your property, check out the WaterSense Water Savings Calculator. After filling in a couple of fields, the calculator will determine how much water, electricity, greenhouse gas emissions, and money can be saved by replacing your current fixtures with WaterSense certified fixtures.

Apartment communities have a great opportunity to conserve water by making a few small tweaks in their buying by seeking out water conservation products. Properties will not only save on their utility bills but will leave more water for future generations. It’s a win-win!

 


Associate Manager of Sustainability, HD Supply

author photo two

Kelly Thompson is the Associate Manager of Sustainability at HD Supply Facilities Maintenance where she manages the ideallygreenSM initiative, which encompasses over 2,800 environmentally preferable parts. She is LEED® Green Associate accredited and is the San Diego Green Building Council’s Marketing Committee Chair. Kelly has participated in various environmental projects such as carbon footprinting, the LEED building certification process, and corporate social responsibility reporting.

  • If anyone is interested in learning more about Tip #2 — send me a note. I will gladly send you a free sample of a dual flush retrofit kit. It can easily be installed — with no tools — in less than 10 minutes. Also ends ALL flapper leaks — which a notriuos for losing water.

    • Rae Schnabel

      would like to hav ethe kit or tell me about it

    • Kelly

      Hi Leigh,
      Can you send me info on it? How much is it per unit?
      Where do I get them?
      Thanks, Kelly

  • Really great article, thanks. There are now toilets that flush at .8 gallons! We’ve been preaching conservation to boost ROI and cap rate since 1991 and supplying low flow products to landlords, property/facility managers and utility companies. Feel free to call us for free info and custom solutions.

    • Kelly

      Hi,
      Do you have a website that I could get the information from?
      Thanks, Kelly

Follow PMI


Property Management Insider is brought to you by RealPage. Learn more.

 

© RealPage, Inc. All trademarks are the properties of their respective owners. 1-877-325-7243 | Terms & Conditions | Privacy Policy | DMCA Notice | Sitemap